Press it twice to read whole information. Read Info - After pressing this button, program will shows ECU info.Connect Selected ECU - By pressing this button user will connects kombi or immo box which is selected from menu.This is useful when type of kombi is unknown. Connect Any Tacho button - By pressing this button user can connects to kombi, and read info for any car's kombiinstrument.File - User can save and read files to / from program memory buffer.Works only for Immo1 type immobilizers! ) It is useful only if you have an already working key, and switch ignition ON with this key. * (There is selections for VW / Seat / Skoda immo box.
Select ECU from Menu - This option selects type of ECU that user will try to connect.After successful procedure, all useful buttons on screen will be enabled.If everything is OK after 5 seconds you will see kombi info on display and program will try to log in to the ECU.After selecting ECU, press "Connect Selected ECU" button.There is no problem if you do wrong selection, but all other functions will work only if you select right ECU. Then press disconnect, and select appropriate ECU from menu.Program will try to connects any kombi and will display type of kombiinstrument.If you don't know type of kombiinstrument, press 'Connect Any Tacho' button.Connect hardware interface to any free USB port of your PC or laptop.Connect OBD connector to car diagnostic socket.Please disconnect your PC or laptop from Internet before install drivers!ĭon't use Windows 'original' drivers! This is important! How to work with software Please use only drivers that are supplied with this product. Please stop your Antivirus software before you extract the filesĬaution: This hardware interface requires drivers installation to work! If Windows ask you for a file with extension ".cat", press "Skip File"!.Show Windows where the drivers are on your hard disk.This will start Windows procedure to install drivers for new hardware found.Connect OBD interface to any free USB port.
0 kommentar(er)
